AES RACKMOUNT Energy Storage System is a rapidly installed energy storage system that is easy to configure for Residential Off-Grid Solar, Whole-Home Backup Power, and Microgrids.

UL1973 certification and pending UL9540 DC – ESS certification enable permitting throughout North America. An industry-leading 10-year warranty and energy throughput performance guarantee delivers a strong ROI. AES RACKMOUNT also meets the requirements of the Electromagnetic Compatibility (EMC) Directive and complies with FCC standards.

Networking AES RACKMOUNT with the LYNK II Gateway enables plug-and-play closed-loop communication with industry-leading hybrid inverters and dramatically elevates charging performance.

In minutes, quickly stack mount up to six AES RACKMOUNT Battery Modules with the AES RACKMOUNT Quick Stack Rack and parallel up to six Battery modules with a single AES RACKMOUNT Battery Combiner.

Install AES RACKMOUNT Battery Modules outdoors with the AES RACKMOUNT 30 kWh Outdoor Enclosure. Parallel up to six Slimline Enclosures – 180 kWh.

AES RACKMOUNT is the rapid install energy storage system designed for Residential Off-Grid Solar and Whole-Home Backup Power. The battery features a high-current GEN-4 BMS that delivers superior peak power for demanding load support and 1C charge and discharge rates. Easy configuration, UL1973, and UL9540-BESS enable seamless permitting throughout North America. An industry-leading 10-year warranty and energy throughput performance guarantee delivers a strong ROI.

AES RACKMOUNT is the rapid install energy storage system designed for Residential Off-Grid Solar and Whole-Home Backup Power. The battery features a high-current GEN-4 BMS that delivers superior peak power for demanding load support, 1C charge/discharge rates, and self-heating allowing for cold charge functionality. Easy configuration, UL1973, and UL9540-BESS enable seamless permitting throughout North America. An industry-leading 10-year warranty and energy throughput performance guarantee delivers a strong ROI.

  • Indoor, Outdoor
  • Battery Combiner
  • Battery Cables
  • Closed-Loop Comms
  • Parallel 180 kWh

An open battery stacking system that is flexible, secure, and set up in only a few minutes.

  • Stack up to six battery modules and a battery module combiner
  • Brackets interlock without tools
  • Facilitates air gap between batteries, reducing heat transfer

Parallel up to six AES RACKMOUNT Battery Modules with a single AES RACKMOUNT Battery Combiner.

  • Fully assembled
  • 19-inch rackmount – enclosure ready
  • Six quick-connect fused battery cable sets
  • Master double pole disconnect breaker
  • Single button power off

Unlock the full potential of an AES RACKMOUNT LiFePO4 Solar Stationary battery by enabling the BMS to optimize and dynamically manage the charge configurations of the world’s best industrial chargers and mobile inverter-chargers. The LYNK PORT on each AES RACKMOUNT LiFePO4 allows for real-time closed-loop communication between multiple batteries and with a charger, or inverter-charger, using LYNK II to aggregate and communicate the State of Charge.

For installers not wishing to use the AES RACKMOUNT combiner, this cable kit includes both DC positive and negative wires with SurLok Plus connectors and ring terminals. These cables are 3 AWG and measure 2 meters in length.

You can order your Discover Battery products from our online store.